Technical Assistance

Yes. Radios from different manufacturers simply have different connector plugs.

Standard connectors are listed.

Digital radios can produce clearer audio but if the signal is weak or there is interference the sound cuts off completely (like digital TV)

Analogue radios may fade out or crackle over large distances but can still be heard at great distance.

Digital and Analogue radios share the same frequencies so are just as likely to suffer interference.

After CB radios, the EU released a set of 8 frequencies (channels) on the 446Mhz (middle of the UHF band) for the general public to use without a licence.

These have been extended to 16 channels but as mobile phones become more popular PMR radio is mostly used by shop and security staff and less so by the public.

The new upper 8 channels are rarely used as older radios generally cannot access them.

If you go licence-free, our radios will come with the new, extended 16 PMR 446 channels pre-programmed. Each of the 16 channels will be allocated a "random" privacy code "CTCSS" to avoid crosstalk with other teams.

In practice, it's entirely possible for 2 teams to be using the same channel but would be very unlikely to actually hear each other due to the "CTCSS" coding. If they are both transmitting at the same moment, you can get interference, but again, as most transmissions between the Pit & driver are only for a few seconds, it's fairly unlikely to cause a problem.

A "Simple UK Licence" from Ofcom will allocate you several VHF & UHF frequencies (Channels) that are not accessible by the public. Again, we can programme these frequencies into your radios along with "CTCSS" codes to further reduce the instances of interference.

A 5-year licence is £ 75 to cover your team. We can assist in your licence application if required.

Yes, if your vehicle has a metal body it stops radio signals getting in or out. Without an external antenna your radios would by useless.

Karts & boats generally don't need a remote antenna as they are open, but ideally the radio / antenna needs to be mounted as high as possible to give the best performance.

Yes. some teams purchase their own, some are allocated them by "Race Control" to monitor safety announcements.

Our pit headset has a special input socket so that you can connect a race receiver directly into the speakers.

Our vehicle wiring harness is designed to allow a race receiver to be plugged into the lead alongside the radio so that the driver hears "Race Control" directly.

The leads for these connections are available separately.

The range of our communication systems depends on the specific model and environment. Typically, our systems provide reliable communication over distances of several kilometers, even in challenging conditions like motorsport tracks and open water. We can also provide custom range solutions based on your specific needs.

Setting up your Intarace system is straightforward. Each kit comes with detailed instructions, and we offer technical support to guide you through the installation process. If you need assistance, our support team is available to ensure your system is up and running smoothly.

Our communication systems are designed to work seamlessly within our own product range. However, in some cases, we can provide compatibility with other brands depending on the specific models. Please contact our technical team to discuss your requirements.

Battery life varies depending on the specific product and usage. Most of our communication systems are designed for extended use and can last for several hours on a single charge. We recommend charging the units fully before use to ensure optimal performance throughout your event or race.

Yes! Many of our systems offer adjustable audio settings, allowing you to fine-tune volume, clarity, and sound isolation based on your environment. If you need specific customization options, please contact our team, and we can assist you with settings or modifications.

Yes! Our systems are designed to withstand extreme environments, from high-speed motorsports tracks to the intense conditions of marine sports. Whether it’s for kart racing, powerboat racing, or pit crew coordination, our equipment is built for maximum durability and performance.

Yes, many of our systems, especially those designed for marine and powerboat racing, are built to withstand water exposure. Our marine-grade radios are water-resistant and rugged, ensuring reliable communication even in wet or submerged conditions.

Our communication kits feature industry-standard connectors, including both wired and wireless options. Common connector types include JACK, XLR, and custom connectors designed for high-performance environments. If you need a specific type of connector, feel free to contact us to discuss custom solutions.

Yes! We offer wireless communication solutions for both motorsports and marine environments. Our wireless systems provide flexibility and reduce the risk of tangled cables, ensuring that teams can move freely while maintaining clear communication.

Our headsets and microphones are engineered for durability in demanding environments. They are designed to withstand high levels of wear and tear, making them ideal for motorsports, pit crews, and outdoor operations. We use high-quality materials to ensure long-lasting performance even in extreme conditions.

Yes! We offer integration options that allow our communication systems to connect with your vehicle’s electronics. This ensures a seamless flow of data and communication, enhancing coordination between drivers, pit crews, and race teams. If you require integration with specific systems, please contact us for a consultation.

To ensure optimal performance, regular maintenance is recommended. This includes:

• Checking and cleaning the connectors to prevent dust or corrosion.
• Charging the batteries regularly to maintain battery health.
• Inspecting cables and microphones for any signs of wear. For detailed maintenance tips, refer to your product manual or contact our technical support team.