Power boating Communications

The kits come in 3 parts:

1) In-boat Kit: ( Wiring Harness, PTT button, Radio, Mounting pouch)

2) Driver(s) Headset: ( Helmet microphone, in-ear speakers, extension lead ) – You can buy multiples of these.

3) Crew Kit: ( Professional noise cancelling headset, Radio )

1) In-boat kit: You can buy the whole package for £172.99 or less (See below), or as individual parts as listed to the right

Wiring Harness:

Heavy-duty cabling to link the radio to the driver’s headset and the steering wheel PTT (Transmit) button. This harness is very long, you should have no problems feeding it through the car. Nexus-type jack socket for the headset connection is quick secure and robust. The radio connector is interchangeable, so other makes of radio can be used – call for details.

£60.00


PTT (Transmit) button:

This is a waterproof, rubber covered button with a strong velcro strap attached to it’s base. It can be secured onto the steering wheel, or anywhere else you would prefer, even a finger!. We can supply alternative button types, for mounting directly to the steering wheel spokes etc.  Please call to discuss you requirements. We can supply just the lead so that the PTT can be wired to existing switchgear.

£24.00

Radio:

The INTA-650 radio is extremely robust & powerful. Fully programmable for PMR446 unlicensed and UHF / VHF licensed channels for those who have an Ofcom license. If you require a license, we can assist you with the application. The radio has adjustable power output and can be run from a battery or 12v via an adapter.

£71.00


Radio mounting pouch:

This weatherproof, padded mounting pouch has loops to the rear so it can easily be strapped / ty-wrapped to the roll cage or similar convenient position.

£17.99

In-Boat Kit:

Including all the above parts.  You need 1 kit per boat

£172.99

By joining our Sponsorship Scheme you could get 7.5% off all these parts

If you need a variation of this kit or have a licence for private channels, please call:  

01527 908658

2) Driver(s) Headset: You need 1 per driver, or just adapters if your driver already has a helmet headset.

IntaRace / PELTOR 4-pole Driver Helmet Headset NO Speakers:

1x Noise cancelling boom microphone Nexus – type 4-pole connector plug 1x 3.5mm mono speaker output socket. To order a stereo socket call 01527 908658

£48.00

Drivers In-Ear foam monitor speakers:

Memory-foam ear tips for comfort and anti-noise performance. Using genuine micro In-Ear Transducers – not cheap speakers. Fitted with 3.5mm mono plug. Other connectors are available – Call 01527 908658

£48.00


Drivers In-Helmet speakers:

High quality helmet speakers for those drivers not wanting an in-ear solution.

Fitted with 3.5mm mono plug.

Other connectors are available – Call 01527 908658

£15.00

Adapters for other helmet headsets:

We can supply a range of different adapters for Stilo, Sparko, MRTC, Autotel etc. Other connectors are available – Call 01527 908658


By joining our Sponsorship Scheme you could get 7.5% off all these parts

3) Crew Kit: You need 1 per person.

Professional Crew / Engineer headset:

Noise cancelling microphone for clarity to your driver. Memory foam earcups for all-day comfort. Behind the head bar leaves just a strap over your head for hats to be worrn. Transmit button and volume on the headset. 2nd audio input for a race scanner etc

£93.00

Radio:

The INTA-650 radio is extremely robust & powerful. Fully programmable for PMR446 unlicensed and UHF / VHF licensed channels for those who have an Ofcom license. If you require a license, we can assist you with the application. The radio has adjustable power output and can be run from a battery or 12v via an adapter.

£71.00

Radio and Headset Alloy Case:

If you purchase the headset and radio together, we will (for a limited time only) supply them in this alloy case, fully foam lined and cut out to keep everything safe and protected.

Kit with case
£164.00


By joining our Sponsorship Scheme you could get 7.5% off all these parts